ESP32-CAM

set up

• ref.約800円のESP32-CAMで乾電池駆動のWebカメラサーバーを立てる
• Add Json file https://dl.espressif.com/dl/package_esp32_index.json
• Install board from Board Manager esp32
• Tool >

Item	Value
Board	ESP32 Wrover Module
Upload Speed	921600
Flash Frequency	80MHz
Flash Mode	QIO
Partition Scheme	Huge App(3MB No OTA)

Sketch

• File > Examples > ESP32 > Camera > CameraWebServer

// Select camera model
//#define CAMERA_MODEL_WROVER_KIT    <-Comment out
//#define CAMERA_MODEL_M5STACK_PSRAM
#define CAMERA_MODEL_AI_THINKER      <-comment OFF

const char* ssid = "my_ssid";
const char* password = "my_password";

• short IO0 and GND, using slide shich
• Upload
• disconnect IO0 and GND, using slide shich
• reset by pressing tactic switch
• open serial monitor

ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8

...
WiFi connected
Starting web server on port: '80'
Starting stream server on port: '81'
Camera Ready! Use 'http://192.168.0.9' to connect

Camera

• Open http://192.168.0.9 on browser
• Press Start streem